LG-01CERAMIC LENS PROTECTION KIT
INVISIBLE
ARMOR.
A ceramic shield for the lens. Carbon wipes clean. Water beads off. One application. Lasting protection.
BEFORE
AFTER
A ceramic shield for the lens. Carbon wipes clean. Water beads off. One application. Lasting protection.
Designed for coated optics first: anti-reflection layers, multi-coated glass, tempered surfaces. Works on scopes, red dots, flashlights, eyewear, phone screens, and watch crystals. Spot-test polarized films before full application.
Coated and multi-coated optics. Anti-reflection layer safe. Tested on Nightforce, Leupold, Vortex substrates.
Glass and polymer lenses. Safe on emission windows and objective lenses. Protects without affecting zero.
Tempered glass, borosilicate, AR-coated bezels. Applies cleanly to flat and convex profiles.
Polycarbonate-safe. No residue, no optical film disruption. ANSI Z87.1 lens compatible.
Glass or standard plastic lenses. Single-vision and multi-focal. Spot-test polarized films first.
Phone screens, watch crystals, and camera lenses. Keeps glass clean and resistant to smudge and oil.
The LG-01 ceramic solution. Single application per optic, with formula to spare.
Two drops on the foam tip; the swab glides the coating across the lens in a controlled film.
Strips the lens of oils and residue so the coating bonds to bare glass.
Buffs to a uniform finish. Keep them. Your field-cleaning cloths for life.
The four-step process at a glance. Keep it nearby for the first application.
No UV lamps, no heat, no return to manufacturer. Open the kit, follow the sequence, leave it overnight. In the morning, the lens has a bonded ceramic shield.
Thoroughly clean with the alcohol wipe and then dry with the grey microfiber. Take note of any residual dirt. If really dirty, clean again until nothing shows on the grey microfiber.
Apply a minimum of two drops directly on the swab tip. The swab will wick the product into a controlled workable film.
Apply evenly in a cross-hatch pattern for full coverage. When you see the product bead up or "sweat" then proceed to Step 4.
Using the black microfiber towel, wipe excess product away and lightly buff until crystal clear. Allow a minimum of 2hrs before use, 12hrs for maximum longevity and performance.